Excavator Rock Crusher Bucket
CTHB Crusher Bucket is perfect for a wide range of different industries and applications. The Crusher Buckets are a type of high-performance excavator crusher equipment for crushing both wet and dry materials right on the job site. All of these crusher buckets are easy to use and can output crushed material in a variety of different sizes. The crusher bucket is composed of a small jaw crusher mounted on a carrier. The most common setup features a bucket with a fixed bottom and one moving jaw that crushes the material against it. An eccentric element mounted on an axle and rotated by a hydraulic motor moves the jaw.
CTHB crusher buckets are used for crushing recycling materials: concrete, rock, asphalt, building or construction waste, foundry waste, and glass waste. Crushing buckets break these materials into small-diameter pieces. Then, small-diameter rocks could be sold as construction material, and those small-diameter waste pieces could be recycled and reused.
Rock crusher buckets are also known as jaw buckets.First, the operator digs the rock; the excavator offers hydraulic power to drive the motor, then buckets start to crush the rocks. The operator can adjust the plate inside of the buckets to control the diameter of the rock that comes out of the bucket’s bottom side…..
The crusher bucket increases the versatility of carriers and can help make efficient work of handling and processing concrete debris, rubble, masonry, asphalt, natural stone, and rock. Whatever the application, the crusher bucket provides a cost-effective alternative to transporting large pieces of material to a dumpsite or recycling yard. It can serve as an alternative to a traditional crusher in confined areas, such as worksites in urban areas.
Excavator Rock Crushing Bucket
One bucket in hand, crushing rock with ease.
Hardcore power, crushing to the very end.
Specification
| Specifications/Model | Unit | CTB20C | BC30C |
| Suitable Excavator | ton | ≥20 | ≥30 |
| Weight | ton | 3.5 | 4.75 |
| Bucket Capacity | m^3 | 0.8 | 1.3 |
| Oil Pressure | Mpa | >22 | >22 |
| Hydraulic Oil Flow | L/min | 200 | 200 |
| Bucket Open Width | mm | 850 | 1190 |
| Bucket Open Hight | mm | 430 | 525 |
| Size (L*W*H) | mm | 2065*1310*1390 | 2156*1645*1395 |
| Specifications/Model | Unit | CTB20C | CTB30C |
| Suitable Excavator | lbs | ≥44,092 | ≥66,139 |
| Bucket Weight | lbs | 7,716 | 10,471 |
| Bucket Capacity | ft³ | 28 | 46 |
| Oil Pressure | psi | >3,190 | >3,190 |
| Hydraulic Oil Flow | gal/min | 60 | 60 |
| Bucket Open Width | inch | 34 | 48 |
| Bucket Open Hight | inch | 17 | 21 |
| Bucket Size (L*W*H) | inch | 83*52*56 | 86*66*56 |
*This specification may be changed without notice for performance improvement.
*Customization available.
- Eliminate most vibration due to the compact design.
- Adjustable output rock size, from 2cm to 15cm.
- Designed to increase 25 %production rates to traditional crushing buckets
- Widest crusher open, available on the market.
- Easy to add grease oil, quick and easy maintenance without sending back to factory.
