Scrap Car Dismantler
CTHB Car dismantler is one of the excavator hydraulic shear attachments that specializes in pulling apart the cars, such as separating engines, seats, front glass, etc.
After pulling different parts, the operator can put parts in a fixed place near the excavator. Keeping the steel structures and making those parts easier for reuse or recycling. This attachment helps save time for humans sorting the parts.
Currently, CTHB offers the car recycling solution for 3 weight level excavators: excavators weighted 5-10 tons, 12-16 tons and 20-30 tons.
“Excavate, Dismantle, Recreate!”
Specification
| Specifications/Model | Unit | CTHB-CD100S | CTHB-CD150S | CTHB-CD250S |
| Suitable Excavator Weight | ton | 5-10 | 12-16 | 20-30 |
| Jaw Opening Width (MAX) | mm | 460 | 700 | 705 |
| Knife Length | mm | 240 | 260 | 520 |
| Rotating Oil FLow | L/min | 15-30 | 30-50 | 40-60 |
| Rotating Oil Pressure | Mpa | 18 | 20 | 25 |
| Cutting Oil FLow | L/min | 120-180 | 180-220 | 250-300 |
| Cutting Oil Pressure | Mpa | 21 | 32 | 32 |
| Back Cutting Force | ton | 65 | 97 | 217 |
| Middle Cutting Force | ton | 32 | 45 | 102 |
| Front Cutting Force | ton | 10 | 16 | 44 |
| Dismantler Shear Weight | kg | 500 | 1440 | 2400 |
| Specifications/Model | Unit | CTHB-CD100S | CD150S | CD250S |
| Suitable Excavator Weight | lbs | 11,020-22,040 | 26,448-35,264 | 44,080-66,120 |
| Jaw Opening Width (MAX) | inch | 18 | 28 | 28 |
| Knife Length | inch | 9.5 | 10 | 20 |
| Rotating Oil FLow | gal/min | 4-8 | 8-13 | 11-16 |
| Rotating Oil Pressure | psi | 2,610 | 2,900 | 3,626 |
| Cutting Oil FLow | gal/min | 32-48 | 48-58 | 66-80 |
| Cutting Oil Pressure | psi | 3,045 | 4,641 | 4,641 |
| Back Cutting Force | ton | 65 | 97 | 217 |
| Middle Cutting Force | ton | 32 | 45 | 102 |
| Front Cutting Force | ton | 10 | 16 | 44 |
| Dismantler Shear Weight | lbs | 1,102 | 3,174 | 5,290 |
*This specification may be changed without notice for performance improvement.
*Customization available.
Key Features and Benefits
- Interchangeable Blade: more conducive to cut materials and lower cost for consumable parts;
- Front Wave Teeth Design: intergrated and tight front end without linear gap, make it easier to clamp the car steel structure or other small accessories of car.
- 360 Degree Rotating: wide opening with 360°hydraulic controled rotating, operator can tear the car components with precision.